LED燈具的日常保養方法
LED lamps are good, but the maintenance of linen is not troublesome, specifically how to do it, and today we come to weapon.
LED lamps
The lighting in the LED lamp has basic coverage, environmental protection, energy saving, no stroboscopic lamp is the biggest advantage of LED, but as a long-term use of lighting, plus some wrong operation, do not pay attention to the maintenance of the same will also be damaged. In life, as long as we pay more attention to the maintenance of lamps and lanterns, we can give full play to its maximum effectiveness and prolong its service life.
Under what circumstances will the LED lamps be damaged?
First of all, when we buy, we must go to the genuine brand manufacturers, poor quality LED lamps must often fail.
Secondly, in the use of the process should be in accordance with the instructions for the correct use of lamps, otherwise it may cause trouble.
Moreover, when used, the current is too large, more than LED lamps rated current, will cause LED drive power part of the components burned or broken down and other risks.
Finally, the LED lamp "water mist" problem, pointed candle lights, bulbs, lights and other lights after a period of time, the outer wall of the water droplets and water mist phenomenon.
How to maintain LED lamps in Fuzhou? Correct use?
1, after we buy Lamps and lanterns, we must first carefully read the installation instructions, and then in accordance with the instructions to install lamps and lanterns, incorrect installation and use, there may be dangerous.
Switch 2, try not to frequent use of lamps, although LED lamp resistance is about 18 times the number of open common fluorescent lamp, but too frequently will affect the life of the LED lamp internal electronic components, thus affecting the service life of the lamp.
3, in cleaning and maintenance, do not change the structure of the lamp, do not arbitrarily change the parts of the lamp, after maintenance, should be installed as the original lamp, do not leak installed, wrong installation of lamps and components.
4, LED light is best not to wash, to dry cloth wet wipe, if accidentally hit the water to dry, should not turn on the lights after immediately with a damp cloth to wipe.
5, in particular, in addition to the special LED lamps, LED lamps should avoid the use of common in moist environment, humid environment will affect the LED lamp driving power electronic components, electronic components damp, shorten lamp life.
Therefore, it is one of the key points of waterproof lighting maintenance, especially the stove headlight LED lamp and kitchen and bathroom, bathroom, must be installed to prevent moisture intrusion proof lamp, avoid corrosion damage or leakage short-circuit.
